• PhD in Mechanical Engineering from Indian Institute of Technology Madras, Chennai in 2008
• M.Tech in Manufacturing Engineering from Indian Institute of Technology Madras, Chennai in 1997.
• B.Tech in Mechanical Engineering from Mar Athanasius College of Engineering / Kerala University, Trivandrum, Kerala, in 1986

Teaching Experience 

• Professor in mechanical engineering at Mar Athanasius College of Engineering, Kothamangalam from July 1990 to March 2020.
• Professor in mechanical engineering and dean of academics at Amal Jyothi College of Engineering, Kanjirapally for five years

Industry Experience 

• Design engineer, M/S Vijay Fire protection systems Ltd, New Delhi, for four years.

Area of specialization

• Manufacturing Engineering

Area of interest

• Metallurgy and material science
• Advanced manufacturing engineering

• Edited the scheme and syllabi for 2002 B.Tech degree for the M.G. University, Kottayam, Kerala.
• Coordinated and prepared the scheme and syllabi for M.Tech degree program in mechanical engineering in the specialization of “Production and Industrial Engineering”; “Advanced Manufacturing and Management” and “Computer Integrated Manufacturing” for the M.G. University, Kottayam, Kerala in 2002.
• Coordinated and prepared the scheme and syllabi for B.Tech degree program in “Production Engineering” and “Metallurgy” for the M.G. University, Kottayam, Kerala in 2010 – 2012.
• Chairman for the evaluation of University theory examination answer scripts and conduct of University practical examinations – mechanical engineering for the M.G. University, zone -3, Kottayam, Kerala from December 2011 –
• Subject expert for the selection of lecturer in mechanical engineering for the M.G. University college of engineering, Muttom, Thodupuzha on 18^th October 2014.
• Curriculum committee member of Mechanical engineering of newly established APJ Abdul Kalam Technological University, Trivandrum. Coordinated and prepared the scheme and syllabi for production stream subjects for B.Tech mechanical engineering in 2014-2015.
• External academic auditor for APJ Abdul Kalam Technological University, Trivandrum 2014 – 2020.
• Member of expert visiting committee (EVC) for M.G University and APJ Abdul Kalam Technological University, Trivandrum at different engineering colleges in 2018 and 2019.
• Curriculum committee member of Mechanical engineering of APJ Abdul Kalam Technological University, Trivandrum 2018 -2021.
• Expert lecture on “Advanced Materials in Intelligent Manufacturing” delivered at Musaliar College of Engineering and Technology, Pathanamthitta on 6^th February 2014.
• Expert lecture on “Micro and Nano Manufacturing” delivered at College of Engineering Perumon, Kollam in January 11^th
• Tech thesis evaluator at Government engineering college Trichur in 2017.
• Expert lecture on “Trends in Modern Materials” delivered at Viswajyothi College of engineering and technology, Vazhakulam in 2012.
• Reviewer of 3^rdinternational conference on “Materials for The Future” during November 6-8, 2013(ICMF -2013) at Government engineering college, Trichur.
• Reviewer of international conference papers and presentation on “Aerospace and Mechanical Engineering” ICAME’15, at TKM college of engineering, Kollam on 14-16^th December 2015.
• Reviewer of mechanical engineering papers 4^th international conference on “Materials Mechanics and Management” (IMMM 2020), 5-7 March 2020 at College of engineering, Trivandrum.
• Guided B.Tech students for the Touch the Jovian Moon contest held at LPSC/ISRO, Valiamala, Trivandarum in 2018 and team has short listed to the first five.
• Question paper setter in mechanical engineering for Kerala public service commission (PSC), Trivandrum in 2018, 2019, 2020; CUSAT B.Tech in 2002; Kerala University B.Tech 2015, Calicut University M.Tech in 2011.
• Appointed as Chairperson to conduct of Ph.D Viva-voce and open defense of Mr.Sam Joshy (Mechanical Engineering), vide letter No. 51772/RESEARCH-C-ASST-1/2020/Admn Dated 12.10.2020, the Director of Research, University of Calicut, research guide Prof. (Dr.) Jayadevan, Government Engineering College, Trissur.
• An online facilitation talks carried out “An introduction to failure analysis” during inaugural function of the society for failure analysis (SFA) – Kottayam chapter on 26/03/2021.- Chief Guest: Dr. N. Eswara Prasad, Director, D          M      S        R   D   E,                Kanpur &Vice-President, SFA.
• Question paper prepared for KTU PhD mechanical discipline entrance examination.

International Journal Publications

• Binu C Yeldose, B. Ramamoorthy, Characterization of d.c magnetron sputtered diamond like carbon (DLC) nano coating, International Journal of Advanced Manufacturing Technology (2008) 38:705–717.
• Binu C Yeldose, B. Ramamoorthy; An investigation into the high performance of TiN coated rollers in burnishing process; International Journal of Material Processing and Technology Journal of Materials Processing Technology, Volume 207, Issues 1-3, 16 October 2008, Pages 350-355.
• Binu C Yeldose, B. Ramamoorthy; An Investigation into the Adhesion Strength of Diamond Like Carbon Multilayer Coating (DLC/TiN/Ti/Cu/Ni); Intelligent Information Management, 2009, 1, 179-194.
• Gopikrishna. S & Binu. C Yeldose; Study on effects of T6 heat treatment on grain refined A319 alloy with Magnesium and Strontium addition, International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), ISSN: 2319 – 3182, Volume-2, Issue-3, 2013.

International and National Conference Publications

• Binu C. Yeldose and B.Ramamoorthy; An investigation into high performance diamond like carbon (DLC) coatings by DC sputtering; Fourth National Conference on Precision Engineering(COPEN 2005) Jadavpur University, Kolkata; 324 – 329.
• Binu C. Yeldose and B.Ramamoorthy; An investigation into the high performance of TiN coated rollers in burnishing process; International Conference on Advances in Materials Processing and Characterization; Anna University, Chennai, 270 – 274.
• (3) Binu C. Yeldose and B.Ramamoorthy; Characterization of diamond like carbon (DLC) nano coatings by D.C. magnetron sputtering, IIT Roorkee, 1^stInternationaland 22^nd National Conference on All India Machine Tools Design and Research (AIMTDR), December 2006, 421-426.
• (4) Sajeev A, Binu C Yeldose; Surface Roughness Prediction Based on CuttingParameters in Turning Operation11^th NATIONAL and 1^stinternational conference on technological trends; Surface Roughness Prediction Based on Cutting Parameters in Turning Operation ICTT -2010, College of engineering, Trivandrum.

Workshops

• AICTE IDEA LAB CONCLAVE at New Delhi during September 2021.